Ask Experts Questions for FREE Help !
Ask
    cherishriley8907's Avatar
    cherishriley8907 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 2, 2007, 10:38 AM
    Si system
    Which units of the si system would you use to measure the length of a tooth?

    Whast is the length in centi meters of a box that is 12 milimeters long

    What is thew volume in milimeters of a beaker that holds 4.2 liters of water
    Curlyben's Avatar
    Curlyben Posts: 18,514, Reputation: 1860
    BossMan
     
    #2

    Feb 2, 2007, 01:12 PM
    1/ well mm would be good.
    2/ simple conversion
    3/ simple conversion
    With the conversions there are a number of online converts that you can use.
    Capuchin's Avatar
    Capuchin Posts: 5,255, Reputation: 656
    Uber Member
     
    #3

    Feb 2, 2007, 02:54 PM
    3) millimeters isn't a unit of volume, so it can't be done.
    jimdurbin5's Avatar
    jimdurbin5 Posts: 5, Reputation: 1
    New Member
     
    #4

    Feb 7, 2007, 07:44 AM
    Mm for 1

    .12 cm

    4,200 ml
    Capuchin's Avatar
    Capuchin Posts: 5,255, Reputation: 656
    Uber Member
     
    #5

    Feb 7, 2007, 07:52 AM
    Hi Jim and welcome to the site. We like to help people with their questions, rather than providing complete answers, this is for several reasons:

    1) It helps the person to learn how to do the question
    2) It helps people who have very similar questions to solve their questions too, this means they don't have to ask again for a very slightly different case.

    If you do want to give an answer, could you please make sure to provide good working, especially in the science forum, where understanding is more important than knowing.

    This isn't a site policy, but is a general good practice.

    If you have any questions please do not hesitate to contact me.

    Thanks
    jimdurbin5's Avatar
    jimdurbin5 Posts: 5, Reputation: 1
    New Member
     
    #6

    Feb 7, 2007, 09:04 AM
    Quote Originally Posted by Capuchin
    Hi Jim and welcome to the site. We like to help people with their questions, rather than providing complete answers, this is for several reasons:

    1) It helps the person to learn how to do the question
    2) It helps people who have very similar questions to solve their questions too, this means they don't have to ask again for a very slightly different case.

    If you do want to give an answer, could you please make sure to provide good working, especially in the science forum, where understanding is more important than knowing.

    This isn't a site policy, but is a general good practice.

    If you have any questions please do not hesitate to contact me.

    Thanks

    No Problem... im a Biology teacher and retired scientist for dow... I will follow guidelines

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

System 32 [ 2 Answers ]

When ever I log on to my lap top, system 32 always appears on my desk top... how do I stop this from happening.

DX System [ 2 Answers ]

Detailed design details of DX System

System [ 3 Answers ]

Dear sir, I have a problem in my system i.e. it reboot automatically after some time interval. I have checked all the possibilities that solve this problem but I can't found the proper result. So please help me for solving this problem. ...

How do I increase H2O pressure on well system with a water filtration system? [ 2 Answers ]

Howdy, I would like to know how I can increase my water pressure. My current system uses a well pump with a small pressure tank, and "D" control valve. It then runs through a WATERSOFT filtration tank, RAINSOFT water softner, and on the Hot water side, an AQUASTAR on demand hot water system. I...

New System [ 4 Answers ]

Does anyone have a suggestion for minimum specs for a new business PC? Small business running Office and Quickbooks and tons of pictures for reproduction, Adobe Photoshop? Want a screaming desktop! I have one in mind, but am unsure of myself.


View more questions Search