Ask Experts Questions for FREE Help !
Ask
    pquartana's Avatar
    pquartana Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2011, 11:03 AM
    What does error code f 01 on my whrilpool duet washingmachine mean
    How 2 fix it
    mmkearney1's Avatar
    mmkearney1 Posts: 6, Reputation: 1
    New Member
    		  
    #2

    Apr 25, 2011, 04:49 PM
    Failure
    Code

    Condition
    Check/Repair
    F01


    EEPROM ERROR
    A communication error between the Central Control Unit (CCU)
    And the EEPROM onboard the CCU occurred.

    PUMP DRIVE ERROR
    The pump driver fails to activate.

    MAIN RELAYS ERROR
    One of the main relays is not working properly.


    A power glitch may cause this error.
    Unplug washer or disconnect power for two minutes.
    Verify CCU operation by running a Diagnostic Test or any cycle.

    Replace CCU board.

    The relay might be soldered or always open.
    Replace CCU board.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Error code F 01 on Whirlpool Duet Washer [ 59 Answers ]

Whirlpool Washer will not run... Error code F 01??

Duet F02 Error Code - Drain Filter [ 4 Answers ]

Can anyone tell me how to check the Drain Filter on my Duet Washer? I found the Code key but Ican't find any directions on how to check the filter. There are some other possible causes but I just washed the dog beds and I am pretty sure that this is the reason I am having problems.

What does an F-31 error code mean on a Whirlpool Duet Washer? [ 0 Answers ]

I have a Whirlpool Duet Washer / Dryer stackable combo. The washer is flashing an F-31 error code... does anyone have an idea what this means and what the problem is?

Whirlpool duet dryer - error code 3E [ 0 Answers ]

Have a 5 yr old Whirlpool Duet Dryer - model GEW9200LW1 - when I try to turn it on lights come on but won't turn on, just beeps and sensor light comes on. Ran diagnostic test on it and got the code 3E. Can anyone help me out?

View more questions Search