Ask Experts Questions for FREE Help !
Ask
    little dove's Avatar
    little dove Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2007, 08:53 AM
    Standing Water Dish Washer
    What can cause standing water in a dish washer after a cycle has completed?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 6, 2007, 08:59 AM
    Two things, the cycle may not really be completed. The timer motor or contacts may have not allowed the cycle to finish. The second problem could be the drain pump has not kicked in. This could be a bad solenoid or even a dead spot on your time.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite dish washer modell 665 not draining [ 7 Answers ]

The dishwasher is not draining even after I pressed the drain button. Is there a way to look for blockage before I call someone. Thank you

Standing Water in Dishwasher when finished [ 2 Answers ]

GE Dishwahser model GSD5630D1 after dishwasher goes through all cycles about 2 inches of water in bottom of tub. Does this need a new sequence switch?

Dish washer space needs to support granite. [ 1 Answers ]

I am install base cabinets. The sink is a bib iron ceramic type. The dishwasher is next to the sink. The counter top will be granite. I need to fabricate and install a dishwasher surround i.e. end cap to support the granite. Cabinet run. Wall, refrig, refirg end panel. Dishwasher, sink,...

How far for the dish washer drain hose? [ 1 Answers ]

I need to get my new dish washer (I haven't brought yet), to a drain. The problem is that (My 4 plex is commercial and all concrete) the closest drain is 10' away from center. I'd even like to get it to drain in the G.disposal, which is another 4 feet, which makes it 14' total. Is this possible? Is...

View more questions Search