Ask Experts Questions for FREE Help !
Ask
    heffner1's Avatar
    heffner1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 17, 2011, 05:38 AM
    20hsp Briggs twin, fires but stalls right out won't stay running. Has fuel spark
    It gets fuel, has spark will start with starter fluid but stalls right out, carb was cleaned has new fuel
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Apr 17, 2011, 09:45 AM

    Check the fuel solenoid on the bottom of the carb.
    Luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John deere l110 won't start have spark and fuel back fires at times [ 2 Answers ]

Ran last week parked in shed now won't start back fires has fuel spark everything but won't start or run eventried starting fluid but nothing

1994 Briggs/Stratton 16HP Twin II (Runs but won't stay running) [ 10 Answers ]

This motor is on a 1994 Murray riding mower. The initial problem started last year when I lost spark in 1 cylinder. I replaced the coil, regained spark in both cylinders. But now this season, it will only run if gas is poured into carburetor, it seems to have vacuum but carb won't pull gas through....

Briggs and stratton vanguard 16 hp twin engine with no spark [ 10 Answers ]

I have a new Briggs and Stratton Vanguard 16hp twin installed in an ATV. Unfortunately on a shakedown run the exhaust pipe loosened and fell on the wireing harness from the ignition key and the engine immediately stopped as the pipe melted through the wire insulation, I assume shorting something...

Briggs and Stratton opposed twin NO SPARK [ 2 Answers ]

I have an old dresser lawn tractor. It was running when I parked it last fall. Now it cranks but won't start. I can't detect any spark. I removed the kill wire from the magneto & jumped the solenoid; spins, but still no spark. There are interlocks on the mower engage lever, but the clutch & seat...

Briggs Twin Running Rough [ 1 Answers ]

I have a B&S twin that is running very rough. I've replaced both plugs, removed both heads and cleaned 20 years of carbon out. Late last season, I rebuilt the carb and it ran great. I compression tested both cylinders and got 90 PSI from both. After the compression test, I forgot to hook up...


View more questions Search