Ask Experts Questions for FREE Help !
Ask
    riverrat1957's Avatar
    riverrat1957 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 16, 2011, 06:29 AM
    Electric baseboard stat. wired to 2 heaters
    I have wired two 240v baseboard heaters to a dimplex double pole td322w stat. Works fine for a long time, then doesn't shut off the heaters and the heat builds. When you turn the temp. dial there is no "click", you have to turn it off to stop the heat.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Apr 17, 2011, 04:11 AM
    Sounds like the thermostat is defective.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

One thermostat for two baseboard heaters wired this way [ 3 Answers ]

Hi guys, I have been upgrading my thermostats here in the house and I have a little challenge now. Two baseboard heaters that I assume are wired parallel (you will be able to confirm) had their own unit mounted thermostat. I'd like to upgrade as well but for those two I'd like to use the...

Electric Baseboard Heaters [ 1 Answers ]

What types of electric baseboard heaters are available? What are each of their merits? Who carries the various types?

Electric Baseboard Heaters [ 1 Answers ]

Hi, I dis-connected my electric thermostat in the bathroom which was controlling The electric heater> I know want to connect a new heater directly with the same wire, , the new heater has a built in thermostat with it, can I used the same wires that came with The Wall mounted thermostat...

Electric baseboard heaters [ 1 Answers ]

I want to install some electric 220 V oil filled baseboard heaters. I need some suggestions as to best make and model

Electric baseboard heaters -wiring 1 thermostat to two heaters [ 2 Answers ]

I would like to heat my new garage with electric baseboard heaters. The new garage is 20X24 feet. I would like to use only one 240V #12 2 wire circuit running two heaters at a total of 3800 watts. I plan to use 2 pole 20A breakers and 2c #12 wire. I would like to have both heaters controlled...

View more questions Search