Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Reprogram garage door opener motor to:1) run slower, 2) pause at end 3) auto return
[ 3 Answers ]
I want to build something that can slide a heavy weight slowly back and forth, with a pause at each end. The travel distance needs to be between 4-10 ft. the weight would be all attached to a flat frame that I can hang from heavy duty channels and bearings - so this frame would be supported by...
How to make the garage door (up or down) switch on or off security lights?
[ 1 Answers ]
Hello: I have a single-car detached gagage w/an overhead electric door. The garage has a dawn to dusk light fixture mounted above the overhead door and hard wired to a second fixture on the side. When I am inside the home (at my back door), I cannot see the front of the garage or its door...
How to build an interior wall inside garage without removing the garage door
[ 5 Answers ]
I want to build a wall inside my 1 car garage, I have flooring down already with those 2ftX 2ft squares with plastic on the bottom and click together wood flooring on top. I can't (because of condo docs) remove the garage door.. but I want to make this into a bedroom. Myidea is to seal the garage...
How do I syncronize my remote control garage door pad with my garage door
[ 1 Answers ]
Can anyone tell me how I can syncronize my remote control pad to open the garage door from the car?? I recently reset my code on the panel, because I didn't know the original code and now when I drive up in the car, my remote contral pad does not work to open the garage door... Any possible...
How do I sync the keyless pad garage door opener to the main garage door opener?
[ 3 Answers ]
I mistakenly gave someone my garage door opener that didn't return it. I had a male friend come over and "change the code" including my car opener and gave me a universial which he also programmed. I came to realize my code for my keyless pad outside doesn't work (since he changed the code... ).... View more questions Search
|