 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Mother board for GOODMAN Heat Pump.
I purchased a goodman duel heat pump in Sept. of 06, within the first three months the mother board went out, due to the expense of replaceing it the repairman didn't even ask they just said that I could no longer use a programmable thermostat. The repair men told me that goodman products didn't work well with programmable thermostats and They removed the mother board. Now I have to replace the coil because it has a leak and its going to cost because of the new requirements for freon. I haven't even had this unit for five years and am having all these problems. My question is are all GOODMAN products this bad or did I just get a lemon.
|
||||
Check out some similar questions!
My Goodman heat pump, model GSH130361AD, heat does not switch on (outer unit). When it first went out, the Honeywell T8411R t-stat digital display went blank. First, I tried replacing the stat with other, but they only accommodated 5 wires. Wiring to the Honeywell was 7 wires. I'll come back to...
Goodman heat pump, model GSH130361AD, Goodman AEPF series Air Handler, and a Honeywell T8411R t-stat. After wiring and setting everything up, the A/C works very good. In heat mode the aux heat comes on but the outside unit does not start up. Emergency heat works well too. The units are used...
OK even when its 17*F out I can still here it running at night. So is this a problem? I mean it runs non stop.
The thermostat is operating/clicks on when desired temperature is more that the actual, but no action at the compressor or fan. We even switch thermostats from other unit in house and both operate the other unit correctly.
Heat strip not working on my goodman heat pump
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
