Ask Experts Questions for FREE Help !
Ask
    LJORDAN6's Avatar
    LJORDAN6 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 9, 2011, 07:11 PM
    Ge circuit breakers /thqp115 /how to install/in main breaker box on outside of house
    Can you show a view of main breaker box that has only one bus bar on the left that takes the breaker thqp115
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Apr 9, 2011, 07:27 PM

    Couldn't find you a picture. If the buss is on the left, then the breaker will be perpendicular with the ground, and breaker will have the right side in and then pivot down onto buss. Most breakers are like this. Turn off power to the panel if you can. Be safe.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Apr 10, 2011, 04:18 AM
    You must have one, so show us a photo of what you have.

    THQP breakers are the half size, and will only plug onto a special busbar, not all GE panels will accept THQP, and many GE panels will not accept THQP in every slot in that panel.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Apr 10, 2011, 06:29 AM

    I found it odd they needed a picture of their panel, unless researching for someone else?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lennox a/c compressor won't turn on after main circuit breaker of house tripped [ 2 Answers ]

Not sure if it's associated but main circuit breaker of my house tripped the other night. (I don't know why!) A few hours later after resetting it I noticed a/c not working properly. I know very little about A/C. Could something have simply tripped in unit that I need to reset. It's a Lennox Elite...

Can my Circuit breakers add up to more than my main breaker? [ 6 Answers ]

I have a 100 amp main and all of the circuit breakers in my main service panel and my sub-panel add up to about 180 amps. Is this all right or do I need to upgrade to a 200 amp main? Any help would be appreciated thanks!

Cost of converting fuse box to circuit breakers [ 18 Answers ]

I have a 100 amp electrical service using a fuse box to which a small circuit breaker panel was added (see photo). I would like to convert the whole service to a 150 amp circuit breaker panel. I live in Rochester, Minnesota. What is your estimate of the cost of this conversion?

Main breaker flips off before lesser breakers go [ 1 Answers ]

My problem is the main breaker in the house will flip off before any of the smaller specific breakers flip off. Something is getting overloaded but the smaller breakers are not taking the load.


View more questions Search