 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have more wires than I need for my Uberhaus thermostat, where do they go?
There are 6 wires when I took off my old thermostat - 1 green, 1 yellow, 1 white, 1 blue, 1 red and 1 black. The thermostat I bought is the Uberhaus th3200 and it takes only 5 wires. I connected all the 5 wires as instructed but left the black one capped. The system runs but the fan does not turn off. Any help with where the balck wire should go?
|
||||
Check out some similar questions!
I have 6 wires on my thermostat. I am trying to install a new thermostat. The new one is not fancy.It's a white rogers 1f56n-444.I can't figure out where all these wires go. The colors are: black, red, white, orange , green,yellow. There is also a tan one for emergancy heat, but the new thermostat...
I'm trying to change a Honeywell RTH 6400, to a LUX TX 500
I bought a honeywell ct8775c1005 thermostat model to replace an old 1970's thermostat. HOwever, there are three wires that connected the old one that controlled heating and air conditioning and the fan. I tried connected the new one and it worked for heating, but NOT AC. I connected the red...
Hi there, I'm switching my thermostat for a newer digital one, though when I took out the old thermostat, there were only 2 black wires with white stripes on them. The new thermostat calls for an RH wire and a W wire, but I have no way of distinguishing the two apart. How can I tell which wire...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
