Ask Experts Questions for FREE Help !
Ask
    baseball13keith's Avatar
    baseball13keith Posts: 6, Reputation: 1
    New Member
     
    #1

    Mar 21, 2011, 10:40 PM
    My 1992 4runner dash lights
    My 1992 toyota 4runner's dash only lights up on the right half of it. I took it out and checked it out there are no bad bulbs but when I put it back in none of it lights up untell I hit my dash.

    Any ideas all will help.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #2

    Mar 22, 2011, 05:34 AM

    Those trucks are notorious for having poor connections at the cluster. Remove the cluster again and look for light corrosion on the contacts.
    baseball13keith's Avatar
    baseball13keith Posts: 6, Reputation: 1
    New Member
     
    #3

    Apr 5, 2011, 12:14 PM
    Comment on CaptainRich's post
    But when I took it apart last the whole thing didn't turn on untell I hit my dash
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #4

    Apr 5, 2011, 04:18 PM

    . Check the ignition switch for wear, pitting, or melting. It may need replacing.

    . Check all under hood and under dash fuses with a test light or multimeter:

    https://www.askmehelpdesk.com/cars-t...tml#post252145

    If the problem persists, the printed circuit board (PCB) is likely bad.
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #5

    Apr 5, 2011, 05:17 PM

    but when I took it apart last the whole thing didn't turn on untell I hit my dash
    Yes, when you HIT it, that may be temporarily be making the "poor" connection better. But that is only temporary. Kind of like jiggling the handle, you know..
    Someone's got to look for that loose connection point.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
     
    #6

    Apr 5, 2011, 05:34 PM

    Recently on the iATN, a tech was chasing the same problem on same truck.
    A new printed circuit fixed it. Just FYI.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No tail lights no brake lights or dash lights on a 1994 mazda b3000 [ 6 Answers ]

I own a 1994 mazda b3000 and was driving along when the dash lights went out then when I got pulled over come to find out the tail lights and brake lights don't work as well I noticed thogh the abs light flash's 12 times then pauses for a second then flash's again 12 times and so on all the fuses...

My 1992 4runner 3.0 efi v6 won't go up hill. Die's and won't start. [ 6 Answers ]

It started when I went up in to the mountains and my mass air flow sensor went out got a new one and got a new efi relay switch but now when I go up hill it just shuts off and won't start. Any idea I got a new fuel pump and seal but I don't want to put it in yet untell I have to. Any answer will...

Tail lights/ Dash lights/ gear lights out in 96' infiniti G20 [ 0 Answers ]

I checked and both the fuses and blubs are fine, brake light and head lights work

Toyota 4runner 1992 won't start [ 3 Answers ]

While driving on residential street, truck made "clicking" noise that seemed to come from the front of truck. Dove 1 mile on freeway and while exiting freeway the truck died. I slowed the best I could & shifted to coast to safe spot. I then tried to start the truck, with no luck. Had it towed....

1992 Dodge Spirit dash lights [ 1 Answers ]

I bought a 92 Spirit and after a few months the dashboard lights stopped working - nearly impossible to see the gauges at night. I used to be able to get the lights working by engaging and disengaging the emergency brakes - now nothing works. Also, the emergency light brake warning lights...


View more questions Search