Ask Experts Questions for FREE Help !
Ask
    rbelk's Avatar
    rbelk Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 3, 2011, 02:56 AM
    Problems with heat on Kenmore Elite model 11066924500!
    If the dryer has not ran for a while it will heat up fine. Then after about 10-15 minutes no heat at all. I have an Ohms meter not sure were to start the check list. Air flow is good and lint is at a minimal. Any starting point would be greatly appreciated. THANKS!
    JimGu's Avatar
    JimGu Posts: 92, Reputation: 4
    Junior Member
    		  
    #2

    Apr 4, 2011, 12:58 PM
    Most likely this is caused by the electronic control, since it works until it gets hot. Part number is 8558178 and it runs around $130.00. You can find it cheaper on Ebay though. I recently saw one for $66 on Ebay.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite he4 model 85091.. no heat, [ 0 Answers ]

Kenmore electric dryer model elite he4 110... 85091... no heat

Kenmore Elite Dryer Model 110.63932102 will not heat [ 6 Answers ]

My dryer stopped heating although it runs. I confirmed I was getting 240volts at the source. I checked the continuity of the element, the thermal fuse and the thermostat and found that they were continuous. I have read that the thermistor might have something to do with it...

Kenmore Elite Dryer Model 110.74972301 no heat [ 1 Answers ]

I have a dryer that runs but has no heat. The ignitor do not spark the gas to get the heat on. The model is 110.74972301. I had this on an older model and found a fuse on the back of the dryer that was an overload fuse. Replaced it and it worked. I can not find that on this dryer. Can you...

View more questions Search