Ask Experts Questions for FREE Help !
Ask
    pradeepu's Avatar
    pradeepu Posts: 2, Reputation: 1
    New Member
     
    #1

    Mar 29, 2011, 07:47 PM
    How to join the two I beams of size 240*100
    RickJ's Avatar
    RickJ Posts: 7,762, Reputation: 864
    Uber Member
     
    #2

    Mar 30, 2011, 11:11 AM

    You need to be more specific, pradeepu.

    What are the sizes of the beams in inches or feet?

    What is the application of your beams?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What gauge wiring and what size breaker is needed for a 5hp air compressor 240 volt [ 1 Answers ]

It is a 240 volt, 15 amp. Vertical compressor and is about 50 feet from the service panel.

What size wire for 220v 100 amp service at 100 feet [ 7 Answers ]

I am running 220v 100 ft to a 125 amp sub panel. A welder would be the heaviest thing used. (around 200 amp welder) what size copper wire would I need running in pvc underground

What size micolam beams needed so I can remove lally columns in my cellar? [ 2 Answers ]

Hello all, I am in the process of finishing my cellar and I would like to remove 2 lally columns that are supporting the 1st floor and 2nd floor in the middle of the house. The beam now is made of 3 2x12's and the span is 18' long supporting 2x8x 12' long on top of the beam. What I would like to...

How to size laminates beams [ 1 Answers ]

I have home with living space on the 1st and 2nd floor and walkout basement. I am planning on renovated the basement into a family room, but I have 4 lolly columns, 2 of which I would like to remove to open up the space of 20' span. My question is what size laminated beam would I have to install...

What size wire for 30 amp 240 volt electric heater [ 1 Answers ]

What size wire should I use for a 30 amp 240 volt electric heater for my guarge?


View more questions Search