Ask Experts Questions for FREE Help !
Ask
    Questioneer's Avatar
    Questioneer Posts: 3, Reputation: 1
    New Member
     
    #1

    Feb 4, 2007, 08:54 AM
    Baseboard heat
    I'm installing 6000 watts of electric baseboard heat in a rental and want to install it all on #10 copper Romex. I want to know if I can install it on a contactor in basement for control of it. I also want to control it on and off with a 120 volt thermostat to coil of contactor.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Feb 4, 2007, 08:57 AM
    Sure, your plan is typical of a 30 amp heat circuit, and will work fine. If you have any specific questions, let us know.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric Baseboard Heat ?'s [ 7 Answers ]

Hi All, I have electric baseboard heat in our home, and each room is controlled separately. And this may sound dumb... do I need to have the heat set at a certain minimum temperature for the winter? (we live in MN) Also, is it more cost efficient for me keep them in each room on at a...

Programmable tstat on baseboard heat [ 3 Answers ]

I bought a low voltage thermostat to work with my electric baseboard heat. It is a low voltage system with two transformers that I can see in my crawlspace. Is low voltage the same as millivolt or do I need to make sure which I have and which the tstat works with? I've got two wires coming to...

Baseboard electric heat [ 1 Answers ]

Does anyone have any recommendations for brands/style of baseboard heaters? Have looked at hydrosil, they claim to be efficient but are higher priced units. Are the fluid/gel filled units that much more efficient than the cheaper units? Thanks

Baseboard heat question [ 12 Answers ]

I've roughed in wiring to install 2 baseboard heaters in a room in my basement.I want to make sure that I got it right.I ran 12/2 wire from the panel to the wall thermostat box,then a separate 12/2 line out to each heater location.I want to use one 1000w heater and one 1500w heater and put them on...

Thermostats for baseboard heat [ 4 Answers ]

We built our house 30 years ago using electric baseboard heat. This is 240 volt electric heat. We would like to change the original thermostats (Mears M7) to progammable digital themostats. Those that we have looked at indicate two models; single pole and double pole. How would I determine which...


View more questions Search