Ask Experts Questions for FREE Help !
Ask
    pipedream's Avatar
    pipedream Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 28, 2011, 09:04 AM
    Plumbing
    Just installed a Taymor bath and shower faucet.
    The handle turns 90 degrees anticlockwise from bottom and when at right it should be hot. However it gets colder turning right.
    The trouble shooting page shows a diagram and turning it right shows hotter but label is opposite.
    The manufacturer cannot solve it.
    Water lines are correct, valve can only be installed one way.
    Can anybody help?
    Thanks.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Mar 28, 2011, 09:54 AM

    Hi PD...

    Take the mixing cartridge/stem assembly out and rotate it 180 degrees and reinstall it... see if that fixes this for you.

    With any luck, it's that easy... maybe... ;)

    Let me know how you make out, OK?

    Mark
    pipedream's Avatar
    pipedream Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 28, 2011, 07:08 PM
    Comment on massplumber2008's post
    Mark:
    The mixing cartridge cannot be rotated. It has two round protrusions on the top that fit into holes in the housing.
    Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Plumbing [ 1 Answers ]

I have a gas power vented water heater 3 yrs old. Today it started making a different sound. It has also maid a sound when running this one is just different. I noticed yellow like crystals on the piping on top of the water heater.

Ppr plumbing vs cpvc plumbing [ 3 Answers ]

Ppr OR cpvc which one is better for residential plumbing

Correctional grade plumbing how different from commercial plumbing or residential [ 3 Answers ]

Just need a little information about the difference to answer a questioner .

Plumbing [ 1 Answers ]

We have very low water pressure in our Kitchen sink /. All the other faucets are fine for pressure. What can l do? Thanks for your help!

View more questions Search