 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
This AM my heater did not come on. Thermostat clicking at temp, I jumped at the board. Still nothing. No indicator lights coming on.
Will start shut off, start and shut off the glow bar glows when its about to come on... then dims when it starts to shut off. The furnace does not ingnite... could this be the limit switch?
Our Trane Xe80 gas furnace had 3 flashing lights sucked on pressure switch unit come on. Now have 9 flashing lights indicating ignitor problem. Should both be replaced? I noticed several people paid to have them replaced and unit still did not work. Any suggestions? Thank You
Trane XE80 No code flash means no power/control failure,what should I check first?
My 10 year old Trane XE80 in my woodworking shop lately cannot put out enough heat to satisfy the thermostat, which yesterday was set at 72 degrees on a 37 degree day. The steel building is completely insulated, and this has never happened before at this outside temperature. The furnace seems to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
