Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring 230v welder has 2 wires and ground which one is hot? Both are same coloc
[ 1 Answers ]
Just bought older welder. Instead of plug it has two black wires and a post for the ground. Welder requires 230v 60hz single phase. I have a standard 220 outlet
12 and 14 gauge ground wires
[ 4 Answers ]
My house is 45 years old and has 12 gauge wiring with a 12 gauge ground wrapped in fabric. I have torn down some walls and want to relocate outlets in neighboring walls. Is it OK to use romex wiring that is 12 gauge but has a smaller ground wire? Can I connect these ground wires together, the 12...
Ground Wires
[ 28 Answers ]
OK... Im wiring up a detached building and I have ran into a small problem. Might be a dumb question but here goes. Im feeding from the box under my meter out to the shed. Im running 6/3 w gnd. I got the shed sub panel under control. But in the box under my meter for the fround wire, there is not...
Ground and neutral Wires
[ 9 Answers ]
Is it proper to connect the ground and neutral to the neutral buss? I am installing a sub panel from a 200amp svc to a 125 service using 6g. My sub box does not have a separate ground buss rather only 2 neutral buses with a crossbar. I was informed that I can put the neutral and ground on that...
Old home with no ground wires
[ 15 Answers ]
I'm changing out some 2 prong receptacles in an old home that has no ground wire (ie, the electrical cables have a hot and neutral, no ground wire). I'd like to install new 3 prong receptacles. Is this OK? What are the implications of doing this? Thanks! View more questions Search
|