Ask Experts Questions for FREE Help !
Ask
    hotc47's Avatar
    hotc47 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2011, 12:17 PM
    2001 ford taurus 3.0l, 24valve dohc valve covers gaskets
    I have a001 ford taurus ,24valve 3.0l, dohc and I have engine oil leaking from the valve cover on top of the engine. Is it a big, hard job to do?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 16, 2011, 12:44 PM

    Not at all--very straight-forward.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2001 Ford Taurus, Failed Starts [ 5 Answers ]

2001 Ford Taurus I have a 2001 Ford Taurus and have been having some weird issues with it. First it started with a chirping noise that was real faint at idle and couldn't be heard at all when driving. The first place I took it to, tried to tell me I needed a new serpentine belt and water pump....

Does the rubber boot around the spark plug on a 2005 dohc ford taurus pull out of th [ 1 Answers ]

I want to change my spark plugs. I own a 2005 ford taurus sel dohc and it has a rubber sleeve. Do I just pull the sleeve up out of the holder or is there a certain techniq to it.

How to Change PCV Valve on 2000 Ford Taurus, with 3.0 L Duratec Engine [ 0 Answers ]

1. Disconnect battery cables (negative first). 2. Disconnect MAF Sensor connector. 3. Remove air filter. 4. Disconnect hoses (3) going to air intake. 5. Remove air intake.

Coolant warning light 2001 Taurus [ 2 Answers ]

It comes on but it has the correct amount of coolant. I have checked it both when cold and after running awhile. Temperature gauge indicates temperature is normal. If I stop and turn off ignition the light goes off. I am assuming it is a sensor that is going bad. Any suggestions?

View more questions Search