Ask Experts Questions for FREE Help !
Ask
    JesterC's Avatar
    JesterC Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 11, 2011, 06:05 PM
    How do I close the low side line on the king valve a trane ex1000?
    I have to pump the system down to take out and clean my coils
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Mar 12, 2011, 02:35 PM
    It should be at the place you are hooking your gauges up at. The refrigeration side of a heat pump or A/C is tricky, If you have to ask this may not be the job you want to under take.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why is control valve installed in return side rather than supply side? [ 1 Answers ]

Why we prefer installing the control valve in the return side rather than installing it in the supply side in A/C units

Trane heat pump trane o/b valve setting [ 2 Answers ]

I have a trane xl1200 (I think) heat pump and don't know if I need to set the thermostat setting on the OB Valve to.. 1) O/B terminal controls valve in cooling or 2) O/B terminal controls valve in heating. Thank you for your help, Kevin Baker

Freezer door won't close flush on side-by-side [ 1 Answers ]

I have a side-by-side freezer/fridge. The storage shelves on the freezer door "hit" the mullion wall when closing and the door won't seal, at the top, once shut. How can I adjust the door to get it to seal, even if I can't stop the storage bin from hitting while shutting?:

Gas line & dryer vent pipe - how close is too close? [ 1 Answers ]

I'm rerouting the gas dryer vent piping so that it will inside the adjoining stud wall. At the top of the wall the vertical exhaust pipe will be within an inch or two of the horizontal running copper gas supply line. Question - is there a minimum distance that the metal dryer exhaust pipe must...

View more questions Search