Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Cast iron sewer line problems
[ 3 Answers ]
I an trying to remove a broken 4 inch cast iron pipe from a 4 inch hub it looks soldered I was going to heat it with a torch and attempt to twist it out any suggestions would be greatly appreciated before I cause myself more problems
How to connect vent line to sewer line in a 3 unit house?
[ 3 Answers ]
I need to have something clarified for me, I have a 3 unit house that I recently bought and the cast iron sewer pipe was cracked from the 2nd fl down to the 1st fl. It has been cut away and I have the 4' pvc to replace it but now I cannot remember how the vent line was connected to it. The vent...
Sewer gas - did I hook up to main sewer line correctly?
[ 3 Answers ]
Moved a mobile home in and ran the sewer line to the main line - on some days I smell sewer gas, and I think it's coming from the vents on the house! - I want to know if I should o had put a "P" trap or something in line before hooking up to main sewer line? I have seen other places saying to...
Sewer line problems
[ 9 Answers ]
We have a pretty old house that was built in 1928. About 4 weeks after we moved in, we noticed that we were having a backup in our sewer drain. After a few days, the whole house had a nasty sewage smell and we had to call Roto Rooter out to rod the line. They were able to rod it to 75 feet and were... View more questions Search
|