Ask Experts Questions for FREE Help !
Ask
    JPatrickM's Avatar
    JPatrickM Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 7, 2011, 04:43 PM
    How to change the code on a 696CD/B legacy garage door
    How do I change the code on a 696CD/B legacy garage door ?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Mar 7, 2011, 06:30 PM

    Will try too search that operator later.
    Most Garage doors, use Dip switches or Learning type programming.
    Which do you have?
    JPatrickM's Avatar
    JPatrickM Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 7, 2011, 07:01 PM
    Learning type programming.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Mar 7, 2011, 07:46 PM

    Try Page 24 and 25 here:
    http://www.managemylife.com/mmh/lis_...M/L0703288.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Legacy garage door opener 696 cd/b [ 2 Answers ]

The door opener does not travel fully when it tries to open or close using the door switch or using the remote even if it is not connected to the door. After several attempts, the door opener will fully open or close the door. I have adjusted the limit switch settings and the door travel does...

Code reset on Craftsman garage door opener [ 8 Answers ]

I will be moving into a home that was a foreclosure and there are no remote openers that came with the house, but a WIRED keypad is mounted on the outside. Can anyone give me the instuctions to reset the keypad code so the previous owner cannot open the garage door?

Manual for 696CD/B legacy garage door opener [ 1 Answers ]

How do the wires go

Reset code on garage door [ 2 Answers ]

I am Realtor and I want to help my clients with the garage door issue (foreclosure property). HOw to reset a password on the keypad. No available remote.

Legacy Garage Door Opener [ 1 Answers ]

Hi, Would anyone know how to program the limits on a Legacy 696cd/b garage door opener? The unit works fine, except for the up & down limits, but the manual is nowhere to be found. Any suggestions? Thanks----------Dan

View more questions Search