Ask Experts Questions for FREE Help !
Ask
    barnis's Avatar
    barnis Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 21, 2011, 08:30 PM
    Goodman 95% won't light.
    The fan clicks on for about 10 seconds and then nothing. The ignitor was replaced and the issue came back after about 2 weeks. If I power cycle for 30 minutes it then usually lights but tonight no. The ignitor does not glow and no gas flows.
    barnis's Avatar
    barnis Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Mar 1, 2011, 09:27 AM
    Seems it was the board... it was replaced under warranty a week ago and so far no issues.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman won't light [ 7 Answers ]

I have a 12 year old Goodman GMPN060-3 furnace. Occasionally it will not light the burners. Three technicians have come out to inspect it. The first person said it was the drain in the floor was plugged. He blew it out and the furnace worked for 2 weeks. Next tech came out and found the switch...

Goodman gmp075 will not light [ 4 Answers ]

Noob here, Goodman GMP075-3 . Vent kicks on, hear relays activate on circuit board, ignitor will not glow. Manually sucked on vent pressure switch hose to make sure diaphram is in, no results. Cut off both end of hose to ensure new tight fit with no pressure loss and reconnected, no change. Made...

My Goodman heater will not light [ 2 Answers ]

I have a Goodman GMP100-4 Heater. It was working fine and now it will not ignite. When I move the thermostat to a higher temperature I can hear the exhaust come on but that is it. I was told that possibly the ignitor went out. Can anyone help? Thanks

View more questions Search