 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Elite washer top loader water won't come out. Any one have any suggestion?
Turn on washer sounds like everything is working fine but I notice no water was coming out at all nor hot or cold, I checked, and the hot and cold water is working fine, but nothing is coming out into the washer when I turn it on. Any suggestions?
|
||||
Check out some similar questions!
I have a top loader Kenmore Elite but I don't have the manual. I put a load of clothes in the washer and it went through the wash cycle and rinse cycle but then I get an error message oL and if I open the lid the machine cuts off. Please advise
Kenmore 70 top load washer. Washer would not give out hot water. I saw another post with this proble and it stated, replace the switch that turns from cold to warm & hot. I replace the switch and it did not fix the problem. I noticed that there is what looks like a shutle velve on the water...
I have a Kenmore Elite that is ~ 5 years old. It recently started to leak only while draining soap. It does not leak any other time. I was speculating that it uses a different path to drain soap and possibly uses a filter on that path. Before I take it apart are there any ideas on why it would only...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
