Ask Experts Questions for FREE Help !
Ask
    eguertin's Avatar
    eguertin Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 24, 2011, 09:48 AM
    200amp 600 volt system
    Told I need 250 mcm R-90 cable
    What is the cost per ft to purchase cable
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #2

    Feb 24, 2011, 01:01 PM

    Help us out here. Please let me know what you are trying to do.

    Can you give us a better description such as who told you, an electrician, a friend, a clerk at Lowe's?

    What is the one way distance that you need? Above or Below Ground?

    Where are you located?

    I haven't found any local source for Type "R" cable.
    eguertin's Avatar
    eguertin Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 24, 2011, 01:34 PM
    Edmonton, alberta

    Electrician
    Repair electrical service
    4 feeds- each 35 ft- underground through condiut from transformer to service panel
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #4

    Feb 24, 2011, 01:41 PM
    We do not sell what your looking for.

    Try an electrical distributor to find out price on the cable, or a website that sells the product your looking for.

    Here is one:

    Draka Cableteq USA | Lifeline 2-Hour Fire Rated Electrical Cables for Critical Circuit Protection
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Adividend of 600 was debited to Wages expense for 600 and credited to Cash for 600 wh [ 4 Answers ]

Adividend of 600 was debited to Wages expense for 600 and credited to Cash for 600 what will be the adjusting entries? I need your help with the journal entries 1-Aug Kendra Greco begins practice as a dentist & invests $20,000 cash 2 Purchases furniture and dental equipment on account from...

Do I need a power transformer 600 volt to 400 volt 3 phase? [ 1 Answers ]

I just bought a used Italian printing machine. Manufacturer says 400 volt monophase. Electric drawing shows all power takeoffs are phase to neutral at 230 Volt. Existing plug on machine reads 250 volt 3 phase 20 amp. This was working in Ontario Canada. How do we wire this machine up?

Can I install a 600 volt single phase circuit in a underfloor concrete raceway with l [ 1 Answers ]

Will the 2008 NEC allow me to install a 600 volt single phase circuit in an underfloor concrete raceway that also has lower voltage control cables if a plastic divider separates the higher voltage wires from the control cables?

What's the difference between a 120 volt and 120/208 volt system? [ 2 Answers ]

We offer our unit in a 120 or 277 volt version. A customer just told me he is using a "120/208" system. What does that mean and will our 120 volt rated product work with it?

View more questions Search