Luxaire furnace coding 6 red flashes on circuit boaard

GNJ0775 Posts: 3, Reputation: 1

New Member

Feb 22, 2011, 07:28 PM

Luxaire furnace coding 6 red flashes on circuit boaard

New furnace luxaire 95.5 percent afue singlestage multi position coding with 6 red flashes on circuit board,any possible causes or service bullitens regarding this furnace and problem

Check out some similar questions!

York diamond 80 red light on circuit board flashes 4 times. [ 2 Answers ]

Miller M1M furnace will not ignite. I have 2 red flashes [ 5 Answers ]

I have a miller M1M gas furnace. It will not ignite. The red led is flashing 2 times. It says the pressure switch is open. Does this mean the pressure switch needs replaced? Or is there something else wrong. How can you fix this problem? Thanks!!

Rheem furnace red light flashes 5 times [ 2 Answers ]

Furnace is Rheem classic 90 plus When thermostat not calling for heat red light flashes 5 times. When furnace is heating red light flashed 8 times. Is this a problem?

Luxaire status light flashes 8 times [ 2 Answers ]

We have a Luxaire heating and cooling system that has been a nightmare from day one. Our model # is G2FD060H24A. Recently, we lost power (due to a storm) while the a/c was on and when the power came back on the unit runs outside but the blower does not come on. We pulled the front off and the...

Miller furnace with 3 red flashes [ 1 Answers ]

I have a miller mobile home furnace about 11 years old... I have been having problems with it not "kicking" in no matter what I have the heat set at. Now it won't start at all. The error code is three red flashes. What does that mean?

View more questions Search

Check out some similar questions!

Add your answer here.