Check out some similar questions!
Ritetemp thermostat and kelvinator furnace and air
[ 0 Answers ]
I have a new kelvinator 2 stage furnace and single stage outside air conditioner. I am trying to hook up a new ritetemp 6030 thermastat. The furnace board is labeled y/y2 y1 g w2 w1 c r. The thermastat is labeled c b o w2 w y y2 rh rc g a . The furnace instructions tell me to hook...
Tumble dryer kelvinator ktd 35 drum is "falling" down
[ 0 Answers ]
Hi. My dryer made a lot of noise lately. When I open the back, I saw that the axil is getting out from the rear bearing and the drum is falling out of it,when the drum circle counter clock wise. I tried replacing the bearing & his housing with a new one, but still the axil is getting out of the...
Kelvinator refrigerator ice build up cyclic defrost
[ 1 Answers ]
I have a Kelvinator C500 cyclic defrost frig. Always had a problem with ice forming around the two pipes coming from the back of the unit to the large white metal plate at the back of the cooling cabinet. These pipes are only short - about 4 inches but get a large build up of ice on them within...
Ice formed in Kelvinator refrigerator
[ 7 Answers ]
Hi there. I have a Kelvinator fridge (model N369B) which has a separate freezer at the bottom. The freezer works fines but the fridge forms ice in the inside at the back of the fridge near the cold metal plate (condensor plate). Would you show me how to repair the ice forming? Thanks, Adam
Squeeky and Loud Kelvinator Dryer
[ 1 Answers ]
I have a 93 kelvinator drier that makes a racket when it runs. I am having trouble getting the back off to look inside. Can you help. Themodel # I think is 131284600 B View more questions Search
Add your answer here.
|