Ask Experts Questions for FREE Help !
Ask
    Nitevis's Avatar
    Nitevis Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 22, 2011, 06:42 AM
    When it recycled it didn't put any water back into brine tank now it's not working
    rjh2o's Avatar
    rjh2o Posts: 58, Reputation: 13
    Junior Member
    		  
    #2

    Feb 23, 2011, 08:52 AM
    What model of softener is it? Most likely there is a restriction ,iron or sediment, plugging the eductor assembly or float assembly. Make sure you do not have a salt bridge also.
    RJ
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tank won't fill with water after water was shut off and turned back on [ 4 Answers ]

The other day my contractor turned off the water to work on the kitchen plumbing. The next day he turned it back on and not my toilet will not flush and the tank won't fill with water. How can I fix this?

How do I put air back into pressure tank [ 1 Answers ]

How do I put air back into a pressure tank that has a recessed air valve I can't get a air chuck on it because it's not like a valve stem it's flush with the tank

Will the brine solution from a water softener hurt the septic bacteria? [ 2 Answers ]

The water coming up from the well is nice and hard. I have been thinking about adding a water softener to the system My concern is the bacteria in the septic system surviving the brine flush from the softener. Will it kill off the septic? Where should I have the water softener flush to? ...

Water softener brine tank overflow [ 1 Answers ]

I have a Rainsoft water softener that is between 10 and 15yrs old. It is set to go off every 3 days and I think my brine tank overflows every time it goes off now. I only have one salt block at a time in the brine tank. I have checked to see if the tube is clogged and it is not as I am able to...

View more questions Search