Ask Experts Questions for FREE Help !
Ask
    chadg's Avatar
    chadg Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 21, 2011, 08:12 PM
    GE dryer ( electric) DWSR485EA1WW
    This dryer is killing me and my wife. It squeaks while running. So I replaced the tub bearing set and shaft. Still squeaking!! PLEASE HELP!! I didn't put any grease on new shaft or housing. Is that the answer just grease?

Check out some similar questions!

My electric dryer vent from dryer to wall collects A LOT of water. [ 1 Answers ]

I have an electric dryer which is vented through the attic to the roof. The vent from the dryer outlet to the wall collects a *HUGE-* amount of water resulting in an excessive amount of drying time (if I'm lucky, they finally dry!). When I emptied the vent & rehooked everything up, I noted that...

Does a Sears Kenmore 90 gas dryer have the same fuses as an electric dryer? [ 1 Answers ]

Hello I have a sears kenmore 90 series gas dryer. And I was wondering if it has the same kind of fuses as an electric dryer? Because everything seems to work but it does not heat. And I would like to know if it has the same fuses as an electric dryer?

Electric Dryer [ 6 Answers ]

Greetings my friends! I thank you for previous answers to earlier posts. I have acquired an electric dryer. The wiring previously was 3 wire (black wire, white wire, and bare ground). Since this is a newer Dryer I went a head it went with a four wire to be up to date with code. At the...

Electric Dryer verus Gas Dryer [ 2 Answers ]

I have a Kenmore Electric Dryer. It seems to take much longer to dry than my old Kenmore Gas Dryer. Is that natural for electric to take longer, thanks


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.