 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Simplicity mower getting spark but too much compresion
My simplicity mower turns over fast when plug is out of the moter and it gets spark when I ground it to the mower. But when I put the spark plug back in the mower the moter turns over at a slow place. It is a new battery with 500 cca. Also it will get spark when plug is out of motor but when I put my thumb over the hole where plug screws in at it builds compression in motor and turns over at half the spped it will not spark.I can not figure it out.
|
||||
Check out some similar questions!
My 1987 Simplicity 4212 Hydrostatic with a Briggs 12hp I/C vertical shaft engine ran fine all last summer. I had it running fine last week and ran it for awhile. When I went to start it today, nothing happened... no click, engine didn't turn, starter didn't engage... nothing! I changed out the...
Just quit. Tried to restart, maybe it will and maybe it won't.
My Simplicity riding mower will not start. It makes a "buzzing" sound when I turn the key.
MTD walk behind with Honda. Stopped to move something out of way and it wouldn't start. I checked the normal, fuel, spark, and only thing I noticed was spark started strong and then died down low. I checked using other plugs and verified the spark starts real strong then drops back. I'm using a...
I purchased a simplicity mower would like to know the year of. The mfg # 909234 ser # 012052.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
