Ask Experts Questions for FREE Help !
Ask
    tomsme's Avatar
    tomsme Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 19, 2011, 01:25 PM
    Cost per sq. ft. for magnasite deck painting in torrance,calif.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    Feb 20, 2011, 08:30 AM

    It is relative to the size of company, guarantee, size of job and prep work needed. The larger the job the lower sq foot cost.

    Chuck
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #3

    Feb 21, 2011, 11:53 AM

    The price u charge is relative to what the area can handle and how much u want to make on job.

    Thank u for negative responds to my answer.

    If u wrote as if u were talking to a person and stated exactly what u needed, u would get an answer that u might like(maybe but doubtful).

    Good luck

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Deck plan cost [ 2 Answers ]

I have a small deck that was put up improperly. I need to have it replaced. I have to apply for a permit and a person associated with someone we were considering building the deck would like to charge us $300 to do the plans (deck 8x14 with a roof and steps) for the county. It seems like a lot...

Deck top. We have a covered deck, planning on expanding deck, a 2x4 crossed cover [ 1 Answers ]

help!! We are planning on expanding our original deck with an open 2x4 crossed cover... do you have pictures or construction help?? Thanks

Deck painting. Looking for thick protective coat. [ 3 Answers ]

Does anyone have any suggestions for a paint type or process for a pool deck that is both thick (to prevent splinters) and durable? Not looking for a clear coat...

Painting Exterior Wooden Deck Rail [ 3 Answers ]

A treated deck was installed in 2004, no paint or stain at this time. In 2006 I painted the top rail with an exterior wood paint. The painted surface is now chipping and flaking off. I'm assuming that I should have primed it first (ouch). My question is, do I now have to sand this down to a bare...


View more questions Search