How do I attach something verticle to a conveyor belt so it will come around and arou

tamaramcg Posts: 1, Reputation: 1

New Member

Feb 16, 2011, 10:09 PM

How do I attach something verticle to a conveyor belt so it will come around and arou

I'm trying to make a carnival game using a conveyor belt and corraplast alligators that come back around. Any ideas?

Check out some similar questions!

Length of the conveyor-25m, Load on the conveyor-10 kg/m Speed of the conveyor-12 m/min How can I design for this input a cost effective belt conveyor Any one please help me simple procedure

Does a vent-line need to be verticle from floor to ceiling? [ 1 Answers ]

We are taking out a shower. Putting in a bathtub. The vent-line is in the way. Its in concrete on the floor. Can we re-route it with an elbow?

Torque required to drive a conveyor belt [ 0 Answers ]

I need to calculate the breakaway torque required to drive a small conver system. The syatem consists of a lagged drive roller and one return roller, there is no incline and the system is a trough arrangement running on nylon guides. Both rollers are bearing mounted.

Verticle lines when photo printed [ 5 Answers ]

I took a picture of water on a rug in a basement under fluorescent lighting, flash and a UV filter. Screen pics are fine, but when the 2.3 MB images were printed as 5 x 7 on photo paper, there were verticle lines about every inch. I guess I need a fluorescent lighting filter? Do you know...

Verticle deck support on a beach [ 2 Answers ]

what is the right way to install a 6x6 support for a 14' x 20' deck. The water level is only 2' below grade. Do I dig a hole below the water line. Do I put the wood on a concrete slab. The deck is only a couple a feet off the ground. Should I dig it down below the frost line.

View more questions Search

Check out some similar questions!

Add your answer here.