 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Elite Dryer won't heat
I cleaned out all the lint and cleaned out the discharge vent as well. I assume we should look at the heating element, correct?
The heating elements on old Dryers were pretty quick to replace and generally cost less than $30 and I did it myself. Does the heating element have an easy slide in option like old dryers and if so where is the heating element located? |
||||
Check out some similar questions!
I have a heavy duty Kenmore Elite dryer for about 5 years (bought new) but it doesn't heat now. Power works fine. The inside part turns/tumbles fine. Light works when you open the door. We clean lint out each time. Just doesn't heat on any of the dial settings. I've switched power at the...
I have a Kenmore Elite Eventemp dryer 110. Model. It stopped heating but the motor runs and the control panel functions. I started trouble shooting and removed the bottom panel and the exhaust cover underneath it. When cleaning the lint, two wires which connect near the lint vent became...
Kenmore elite dryer won't heat
I have a Kenmore Elite dryer that doesn't heat now. Power works fine. The inside part turns/tumbles fine. Light works when you open the door. Replace ignitor and cleaned all vents. Just doesn't heat. It's an electric dryer. Model number 110.73022101 Recommendations? Thanks!
I have a Kenmore Elite Gas Dryer model number 110 72056 100. When I select a cycle to dry; they dryer turns, the air is blown out of the house; :confused: however, it is cold air even though I have selected a hot air cycle. Please let me know if you know what could be wrong with this. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
