Whirlpool Estate Washer not going to next cycle. Works great if I manually cycle it.

Jake_Rio Posts: 1, Reputation: 1

New Member

Feb 15, 2011, 08:09 PM

Whirlpool Estate Washer not going to next cycle. Works great if I manually cycle it.

The water level is correct. Manually changing the Washer from the initial wash/agitate cycle to the rinse/spin cycle works fine. However, I must also manually advance to each subsequent cycle.

Check out some similar questions!

Whirlpool washer, agitator works, but during the spin cycle it doesn't spin [ 1 Answers ]

I have a whirlpool washer, I replaced the outer tub and the drive block, but it now doesn't spin. It drains the water, I can hear the motor come on, and feel the vibration . The switch is fine. I looked at the couple, but did not take it apart. The clutch looked fine, sanded the pads and case....

Whirlpool LSR9434PQ0 start cycle just hums but spin cycle it works perfectly [ 1 Answers ]

My Whirlpool washer model# LSR9434PQ0 will just hum when you try and start a wash cycle. If you rotate the timer to a spin cycle, it will work fine. I've looked at all of the wire harnesses and connections and there is no sign of a surge burn or a short. Any help would be great. I'm in the...

Washer needs to be manually advanced to go into rinse cycle. [ 1 Answers ]

What is wrong if a washer will not advance itself into the rinse cycle? If the knob is manually advanced it works fine. Someone is selling a 5 year old washer with this problem for $40 and I am wondering if it would be worth it to buy and repair myself.

Whirlpool Washer Spin Cycle [ 1 Answers ]

Just bought a new whirlpool washer (MD#: WTW5790SQ0), the spin cycle on the washer doesn't work on any cycle EXCEPT normal wash. This was determined by: closing the lid, selecting each individual spin option on the dial and pulling the knob out (starts washer). Both spin cycles work on the Normal...

View more questions Search

Check out some similar questions!

Add your answer here.