Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Small vibration while in 4x4 (2004 Chevy 2500 4x4)
[ 2 Answers ]
I am having a small vibration when I place my truck in 4x4. I can tell it only happens while in 4x4, because I put it in and out of 4x4 several times and it only happens when I put it in 4x4. It has 130,000 miles and have had little to no trouble with truck so far. I am not especially hard on...
How to remove front rotors on 1993 chevy suburban 2500 4x4
[ 3 Answers ]
I have already removed the callibers&the large nut on the spindle.I then tried tapping on The rotor w/hammer but doesn't seem to budge.do I need a wheel puller because the Rotors are pressed on or do I need a bigger hammer?
1988 chevy suburban won't stay running
[ 9 Answers ]
My 1988 R10 suburban 5.7 starts fine but stalls after 5 or 10 seconds, wait another 10 seconds it will start again and stall, every so often it will stay running for varying lenghts of time but will stall and start with the 5 or 10 second thing again, I removed the map sensor it idled rough but...
Problems with 01 dodge ram 1500 4x4
[ 1 Answers ]
hi, I have a 2001 dodge ram 1500 4x4 and it doesn't want to start some time in the morning, I find it is worst when it is wet.. but it has been sputtering a bit lately and when I would stop to a light or slow down I would here a tic noise like a spark noise and it would sputter... anyway it will... View more questions Search
|