Ask Experts Questions for FREE Help !
Ask
    HorstR01's Avatar
    HorstR01 Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 13, 2011, 08:59 PM
    Hardie pop-up sprinklers
    I recently acquired a unit with Hardie pop up lawn sprinklers integrated into a complete garden watering system. Rather than take the sprinklers out, is there an easy way to disable them until I put a lawn back in (if ever). I have turned the adjusting screw right down but am still getting a trickle. Are parts available (eg. Caps or blanks) to shut them off completely?

Check out some similar questions!

Ceiling painted then pop corned. How do I remove pop corn and paint? [ 2 Answers ]

Drywall ceiling was painted, then some time later it was pop corn textured. When removing the pop corn, the paint under the pop corn is hard to scrape off. When repainting over the old paint, the old paint peals back all over the place. What can I do to get the old paint off so I can mud some of...

No pressure from lawn sprinklers [ 1 Answers ]

Hi there. After about 8 months of no use, I decided to turn my lawn sprinkers on today. While a few sprinkler heads are now covered in grass, the heads which do pop have very little water pressure. It is a well system with a pump. The pump seems to be working fine and I can cycle through...

No water from sprinklers! [ 5 Answers ]

After the recent hurricanes in Florida, we were without power for a week or so. When we got power back, I noticed a small leak where the pipe that feeds my sprinklers comes out of the top of the pump. I cut the pipe and resealed the threaded piece that was leaking then glued a coupling to reconnect...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.