 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I started with a slight dripping problem(sayko system).i decided to replace all 3 stem assemblies together as they all were about 18 years old.after reassembling the new stems(danko brand),turned on the water supply & checked faucets.hot & cold worked fine but when the shower was turned on,water...
When upstairs tub valve is opened for the first time in the evening, loud banging noise sometimes ensues from pipes. Banging is alleviated when supply is redirected to showerhead, or when water is turned off. Single-handle Pegasus (Home Depot) valve. No issues when supply is off (not "water...
My toilet flushes fine and the water comes up to the water level in the tank and stops, but 40 seconds later you can hear the sound of water leaking or maybe slowly going back out of the opening. There is no water on the floor, wall, fittings or on the tank. What's going on here>
My power company uses 90 hours for average monthly running time for figuring monthly cost.I don't know for sure but believe basing this on family of four.Now I know might be hard to know being so many factors to figure in.I live alone and hot water consumption is one shower a day.Laundry I do...
Changed the stems and the cold water works fine but I can not get the hot water to stop running. I have the handle turned off completely and it runs like I have it wide open. Please help us as soon as possible
View more questions Search
|
