 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Payne air handler fuse blows when I switch to heat
I have a 2 1/2 ton pain air handler with electric heat less than a year old. Cooling worked just fine through last summer, but now when I switch the thermostat to heat it blows the 5 amp fuse. I replaced the fuse and turned on just the fan and works just fine, but when I go to heat the fuse blows again. Any ideas to check, I can't afford a serviceman.
|
||||
Check out some similar questions!
10 year old Rheem air handler RHBA-21J8MFCA, 1/3HP, 2.8A. New WeSt Columbia, SC 29170, Model 2HP13L48P-1B, HCFC-22, 4TON. Installed new out of box iN July and AC working splendidly but start-up is "violent" and loud. Installer says I need some sort of "start-up kit". I put off as had planned...
Payne Air handler doesn't turn on, I thinkk it might be a fuse, where and how do you replace the fuse
I have a payne air handler(14 year old)... the 5 amp fuse is blown. I replace the fuse and it blew again... I noticed that the 220 ground is corroded and should be cleaned/replaced. Am I at the source of the problem or are the other items to look at be replacing the fuse? Currently nothing...
I have a Carrier Heat Pump System. It’s about 5 years old and has functioned OK until this Christmas Eve. One problem is the condensing unit is not kicking back on after it goes into defrost mode. I found a 5AMP fuse blown in the attic unit and once replaced it functioned. At least for a day or two...
Hi y'all, My air handler fan fuse blows everyday, while condenser keeps working. About a month ago, we replaced our old thermostat with Rite Temp 6022, everything was fine until last Thursday. The fuse blew in the afternoon, hubby replaced the fuse and things were good again, until Friday...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
