I am replacing a 2 lights ceiling fixture with a 1 light . What do I need to do

kuaukai Posts: 1, Reputation: 1

New Member

Feb 9, 2011, 01:55 PM

I am replacing a 2 lights ceiling fixture with a 1 light . What do I need to do

creahands Posts: 2,854, Reputation: 195

Ultra Member

Feb 9, 2011, 02:29 PM

When u take the old fixture down, u will have 2 wires coming from the ceiling box. Wire nut one wire to each wire coming from new light.

Chuck

Add your answer here.

Check out some similar questions!

Replacing a ceiling fan with a standard 2 bulb light fixture [ 3 Answers ]

After removing the ceiling fan there were two cables of wire coming into the junction box in the ceiling. One cable (I think from the wall switch) has a red, black, white, and bare copper ground wire. The other cable in the junction box has a black, white, and bare copper ground wire. When I...

Replacing a ceiling fan with a light fixture? [ 7 Answers ]

I'm replacing my ceiling fan with a light fixture. The ceiling fan was operated by 2 wall switches in the same wall box. One switch controlled the fan and the other switch controlled the lights. The pull chains were not used. In the ceiling box, there's one black wire, one white wire and one red...

Replacing ceiling fan with light fixture [ 15 Answers ]

We removed an old ceiling fan. In the ceiling box, we have 3 white wires and 3 black wires. The room has only one light switch, but in the hallway, there is a light switch that operates the hallway light. We have tried different combinations. But what happens most of the time is that the light...