Ask Experts Questions for FREE Help !
Ask
    camperfriend's Avatar
    camperfriend Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 8, 2011, 05:43 PM
    Water and gas lines bonding
    Do I have to take bare copper #4 wire from mobile pedestal outside to the gas and water lines and the breaker panel inside the house? Or just bond the water and gas lines to the outside pedestal?

Check out some similar questions!

Cost to remove/replace galvanized water lines in walls with copper lines. [ 3 Answers ]

The long water lines have been replaced under the house, but not the lines in the wall. What would the cost be for kitchen, 1 full and one 3/4 bath?

Gas Lines [ 1 Answers ]

Can I hook up gas, countertop stove, going from wall to(9"flex),to regulator,* to(60"flex), to stove and is it within regulation compliance

Bonding Natural Gas Piping [ 5 Answers ]

I had a natural gas system installed in my home and bonding the pipe entering the home has been a problem with the inspector (VA - Fairfax County). Anyway my HVAC contractor grounded the black pipe to the cold water copper with #6 AWG; however, the inspector is telling us the pipe needs to be...

Hydrogen bonding in water vapor [ 4 Answers ]

Unlike a liquid or solid a gas will always expand to fill its container as best as is possible. However, water is hydrophilic because of its uniquely massive amounts of hydrogen bonds (not so much bonds as powerful associations), does it take this same quality through into its gaseous state? To...

Gas Lines [ 5 Answers ]

How do I pressure check gas lines and what device do I use?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.