Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I'm replacing a white rodgers 1F58-72 model thermostat with a Hunter model 44155C
[ 2 Answers ]
There are some different wiring codes that are different how do I do it.
Replacing old White Rodgers Thermostat with Hunter 44260
[ 0 Answers ]
Where do the blue (E), and the pink (O) wires go? I think the rest go Y to Y/O; R to RH; W2 to W/B; and G to G, and I already read that brown (C) is not playing. Thank you.
Wiring for thermostat: Going from White Rodgers to Hunter
[ 5 Answers ]
Help, someone please! I have a Carrier heat pump with a White Rodgers programmable thermostat that keeps tripping off the settings we use to program... next thing you know the a/c is off and the house begins to warm up to 85 degrees the White Rodgers thermostat defaults to because technically a/c...
White Rodgers to Hunter Thermostat
[ 2 Answers ]
I currently have a very old White Rodgers thermostat with large push buttons at the very top. I want to replace it with a Hunter Model 44260. Here is the current configuration -------------------------------------- red <= Don't know if RED goes to RC or RH white green yellow
White-Rodgers to new Hunter Thermostat (Wiring Help Please)
[ 4 Answers ]
Hello, I have a new home, built in 2003, with Central Heat and Air. It's all run off electricity and is using a Lennox Model CB29M-41-1P heat pump. The WHITE ROGERS DIGITAL HEAT PUMP THERMOSTAT 1F89-211 used the following wires: White Red Brown Orange Yellow View more questions Search
|