Ask Experts Questions for FREE Help !
Ask
    Troysch's Avatar
    Troysch Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 5, 2011, 01:05 AM
    Wiring for 13.5 briggs and stratton engine?
    I have a murray ride on with a briggs and stratton 12.5 that blew up and I have replaced with B&S 13.5 power built intek model, there is extra wire going to the carbie that was not on the old engine, and the engine does not seen to have any spark to start, do I need to connect this wire to ant thing?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Feb 5, 2011, 08:47 AM

    The old engine had a fuel solenoid,
    The new probably doesn't.
    Just tape the end up and put it up so its out of the way
    Troysch's Avatar
    Troysch Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Feb 5, 2011, 02:11 PM
    It's the new engine that has the wire is that for the carbie, is there a solenoid that needs to be triggered in there, or is it just for a warning light?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #4

    Feb 5, 2011, 05:13 PM

    Yes it will need to hooked up so when you turn it on there's power there.
    Luck
    Troysch's Avatar
    Troysch Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Feb 6, 2011, 03:44 PM
    Thanks for your help, I hooked up the 12v and it goes like a charm.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

18.5 HP Briggs and Stratton Engine [ 4 Answers ]

I have a 42" Craftsman riding mower with a 18.5 HP B&S engine. It started using oil suddenly a couple of weeks ago. The compression is 120#. What could be the problem? Also after it has been running for about 10 minutes, it shuts down. It does this with fresh fuel, new plug, clean gas tank, new...

17 hp briggs and stratton engine [ 2 Answers ]

How difficult is it to change the head gasget on a 17 HP briggs ans stratton engine for an amateur.

Briggs and Stratton engine [ 3 Answers ]

My Briggs and Stratton 10D902 lawnmower engine is running very rich. The air cleaner is OK Can you please advise

14.5 Briggs and Stratton engine [ 1 Answers ]

Can someone please tell me how to adjust the valves on a 14.5 over head valve engine? Thanks, roustaboutx

View more questions Search