 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hi.. I've had many questions answered searching this site, but I didn't really find an answer to this one. I'm posting some pics to help shed light on the subject - hopefully. Due to horrible craftsmanship, cosmetic and function issues I decided to remodel my basement bath. I have yet to...
I have been designing a drainage plan for an old home. The plan is a little weird because I have to work around duct work and some other things. I would appreciate any thoughts or pointers as to the easiest and best way to setup this system. One thing I am wondering is if I may be able to shrink...
I had a contractor raise the ceiling in a upstairs bedroom. It exposed the vent for the attic. The contractor wants to put sheetrock over the vent and allow about 7" clearance for ventilation. I'm concerned that the sheetrock is to close to the vent and moisture will cause mold. There is room to...
Can a new bathroom, toilet, sink, and shower be vented through an existing 1 1/2" vent? The bathroom will be in the basement, and the vent is part of kitchen on the first floor. Would a 2 1/2" better, or can I use what I have if I tie into the vent above the kitchen sink ? Thank you... Rick
Hello Experts, My son and I are doing the new DWV system for our house. I have a lot of experience in doing plumbing so I'm not a novice, but I do need to make sure I am doing the venting properly (I know the vent is just as important as the drain lines) as I haven't done anything quite this...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
