 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Luxaire Gas furnace pdcu-ld12n105a runs constantly
Luxaire Gas furnace pdcu-ld12n105a runs constantly with the heat and fan. Like a run away furnace! Pulled the themostat off the wall with no effect. Had to cycle the toggle switch on the side to turn it off. Now it runs but has done this before. Any suggestions?
|
||||
Check out some similar questions!
I have TG440 Earth Stove gas fireplace. It has an optional fan with a dial-a-temp controller that I plug into a 120volt receptacle. I recently replaced my old honeywell mercury thermostat with an electronic honeywell RTH2310 and now the fan runs constantly. What have I done wrong?
How do you fix a Luxaire furnace every year the furnace goes out. I think because I constantly turn the heat up and down. I call a tech he comes out and it's the same issue. The safety switch has turned off or something like that. I know it's simple because it takes the guy like 10 minutes total...
This relates to a problem I'm having with my gas furnace. I took a power hit and ever since then the blower on my furnace continually runs when I have the thermostate set at off and fan on auto. I repalced the thermostate no help. I did notice the fan runs slightly faster when I switch it from auto...
This am we I got up the blower on my carrier series 100 gas furnace (approx 10 years old)was running and blowing out cold air. Even with the thermostat turned to off the blower runs constantly. The only way to stop the blower from running is to turn the switch on the side of the furnace to off or...
My gas furnace is approx. 30 years old. The furnace will run one cycle, shut off and approx. 15 seconds later run again for a shorter period. Everything is working properly, heating correctly etc. but runs two cycles. Any thoughts on why?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
