Ask Experts Questions for FREE Help !
Ask
    Ron0303's Avatar
    Ron0303 Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2011, 03:24 PM
    How do I connect an Omron H7CX-A Multifunction Preset Counter on a 110v motor
    Hello, just a follow up info on my first question. I just want to be more specific.

Check out some similar questions!

How do I connect a self powered 12v counter on a 110v sewing machine motor [ 2 Answers ]

Hi there, My project is connecting a 12v digital counter to a 110v sewing machine motor. I've attached the photos of the counter.

Cranks no start bad multifunction switch [ 0 Answers ]

99 taurus engine swap from 97 taurus same engine harness cranks no start no spark no fuel pressure no check engine light wipers turn on by themelves

What would happen if a 220V motor was powered by 110V? [ 2 Answers ]

In general the question is what would happen (and why) if a 220V motor was powered by 110V. Not interested in the conversion wiring, say someone made a mistake and wired a 220v motor using 110V. My opinion is it would run slow, if at all, and eventually fail. Is this correct?

How do I connect my new AC Fan motor? [ 5 Answers ]

Hi there. I just bought a new AC fan motor for an old Trane AC. New Fan motor for inside unit has more wires than the original fan motor. Here's the info: AC Unit: 1986 Trane Has 3 connection wires: White Red Off-White **Connection site is has wires in a plastic plug format

Wireing a GE reversiable 110V motor [ 1 Answers ]

Hi, I have GE 110volt reversiable motor model# 5KC38M12Z, 1725 RPM , look to be 1/2 hp? It has 3 Studs 1 is common 2&3 are forward and reverse, there are two wires that com up from inside of motor(Start windings Maybe) not hooked to any thing. I need to know where they hookup to. The...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.