 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I recently got a RF p4004 4chan. Amp for my car and I'm looking to hook up a sub or two. My question is how can I hook this up. I have run all my amp wires (Bat. remote, ground) but the only input I have for my amp is a pair of RCA cables. I took an old cable and cut the terminals off one end...
My question is this. I now have my tv2 output on my Bell 9200 receiver connected with 50 ft of inexpensive rca to rca composite video cable to my second TV. The picture on my TV is acceptable but I am not completely satisfied.Would a high quality rca to rca cable or a high quality rca to s-video...
In LAN settings, when I click on TCP/IP settings, it is not allowing me to open up.
I have a rca 52" mod.# p52754at built in 12/ 1996. The problem is that after warming up the width of the picture expands or gets wider by several inches on each side. It is about the same as my newer TV width in the expand mode. Is this a common problem with a known repair? Don't want to put a lot...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
