Ask Experts Questions for FREE Help !
Ask
    wmcdonnell's Avatar
    wmcdonnell Posts: 23, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2007, 03:30 AM
    Blower issue
    During the end of summer, we had a new blower motor put in. The tecnnician did not plug the motor into the board and a guy that was working at our Church plugged it in and it was fine. Yesterday, it was 7 degrees in Ohio and our furnace is working, but is not blowing the heat out. I'm wondering if it is the blower unplugged, if so, where is the board located on a RUUD furnace to plug it in?
    The furnace is igniting but it won't stay on as the blower isn't coming on!
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Jan 29, 2007, 07:11 AM
    If it is a newer Ruud the board is in the blower compartment attached to the blower package. The terminals are marked park, park, heat, cool, typically. Don't use low speed (red) for heat, use blue or yellow. Just so you and others reading this post will know, Ruud/Rheem has over 30 models of furnaces they have made in the last 20 years, so all this information is just speculation based on most popular model and of a modern age.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Who issue W2? [ 3 Answers ]

Hi Work summary: - Worked in a University for Jan and Feb 2006 - Worked on CPT (training) with a company from March till 1 May 06 - Worked on OPT with same company from May 1 to Dec 1 06

Blower Issue [ 1 Answers ]

Hi! I am having some issues with my furnace blower. 1) Fan is on "Auto" 2) Thermostat calls for heat 3) Green light comes "On" on IPI module and then burner comes "On" 4) Flame occurs 5) Blower doesn't come "On". After a while, the burner stops for safety reasons. This issue repeats until...

Issue with a former employer... [ 4 Answers ]

I recently decided to change jobs. The company that I left had hired me through an employment service. I signed an agreement at the time to re-imburse the employer 50% of the fee he paid if I left before 12 months. I did indeed leave before 12 months after giving the owner an almost 3-week...

Is this a issue ? [ 7 Answers ]

PC : XP Pro Service pack 2 --------------------------- Start/Run <typed>MSCONFIG Looked in: Win.Ini Programs It shows: ;msconfig Luke.exe=C:\storage\calarkconnect iso\clarkconnect-2.1iso

View more questions Search