| 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Hole drilled through Toilet exhaust pipe in wall - possible sewer gas leak
 [ 2 Answers ]
 My husband drilled a 5/8' hole into the toilet exhaust pipe running up the wall. He was trying to hang a cabinet and thought he was drilling into a stud. Now, hours later that toilet is constantly running and can not be flushed. I am worried about sewer gas excaping into the walls and house. Should... 
Blue Exhaust Pipe
 [ 3 Answers ]
 Does a lean mixture cause bluing in exhaust pipes? I understand it happens when the metal surface is scorching and, usually, there isn't a heat shield, but I asked a guy at a dealership and he told me bluing is unavoidable no matter what. I don't believe him. I'm going to rejet and replace the... 
Attaching properly gas flex pipe to gas pipe and gas stove
 [ 5 Answers ]
 How do I properly attach the flex pipe to the gas stove on one end and the supply pipe on the other end? Do I need a gas poxy? If so what is the proper method of application--on both sides of the attachments (flex pipe and gas supply pipe/stove) or on just one, how much is enough? How tight do I... 
Exhaust fan to relieve snow load
 [ 1 Answers ]
 I have a cabin in a high snow load area (32 feet last winter). I have a steel roof with a 6/12 pitch. Problem is that this year, the snow never slid until very late in the winter. My roof can handle 132 psf, but I worry that one of these days, the weight may exceed the truss design. I do not... 
Natural gas pipe in bsmt is touching gas pipe
 [ 2 Answers ]
 I just bought a house and in the basement the single wall furnace flue is touching the dark iron natural gas pipe, just before it enters the brick chimney , the water heater also has single wall flue that runs through wood structure. The previous owner put coffee cans around the flue, he cut off... View more questions Search 
 |