Ask Experts Questions for FREE Help !
Ask
    jackmonroex's Avatar
    jackmonroex Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2011, 02:55 PM
    Mixer shower losing pressure
    I recently had a mixer shower installed, I think it's a Mira Atom, it is connected to a booster pumped which is located beside my hot water cylinder. The pump starts and stops sometimes when the shower is running. What could be causing this? Thanks to any replies
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 27, 2011, 03:42 PM

    What pressure setting are on the booster, when does it kick in and when does it good off? Raise the off or high setting a bit higher
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Mixer shower losing pressure [ 0 Answers ]

I recently had a mixer shower installed, I think it's a Mira Atom, it is connected to a booster pumped which is located beside my hot water cylinder. The pump starts and stops sometimes when the shower is running. What could be causing this? Thanks to any replies

Why am I getting low hot water pressure in my shower mixer? [ 1 Answers ]

I just installed a single contol tub and shower set by price pfister and when I Turn the water on I am getting cold water and warm water and no hot water what did I do wrong

No pressure and no hot water in mixer shower [ 1 Answers ]

Pardon my illeterate plumbing language. In my new home, there is no hot water in my shower. There is no much pressure and water is only luke warm. Sometime it goes cold and then when I turn off and turn on it get luke warm. I have a combi boiler. I can get hot water every where else e.g. sinks...

View more questions Search