Ask Experts Questions for FREE Help !
Ask
    askit2010's Avatar
    askit2010 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2011, 08:19 PM
    Hunter remote installed. Light/fan going on spontaneously. Code changed. Now what?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 24, 2011, 09:29 AM

    When you use the remote does everything work normally? How often does this happen. You say you changed the code, wher did you find the dip swwitches
    askit2010's Avatar
    askit2010 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 25, 2011, 06:09 PM
    Yes, remote works fine when using it. Spontaneous fan and light turn ons happen every day. The electrician who installed the Hunter remote into the Hunter fan came back and changed the code.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Jan 25, 2011, 06:17 PM

    Did it improve after he changed the codes, what did he have to say about the fans operation?
    askit2010's Avatar
    askit2010 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jan 25, 2011, 06:21 PM
    No, it didn't improve. Still have the same problem. He said we should try installing a new remote that is not a Hunter. When googling this problem, it appears to be common with Hunter remotes. Called Hunter. They said they would send new remote. Electrician is skeptical that this will work any better.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Remote works on three different fan combos, can the code be changed [ 1 Answers ]

I just changed the battery in my hunter fan remote control part #85094-01 - now the [ 0 Answers ]

Now the red indicator light stays on even when the buttons are not pushed. The controller is operating the fan OK but the red indicator is on constantly.

Hunter Park Hill Type 2 - Remote LED light on, but Light/Fan not working? [ 2 Answers ]

Remote Control LED light is on, but the Hunter Park Hill Type 2 Model 20578 Light or Fan will not work... why?

I just installed the remote kit on my fan and when fan is on the light strobes on&off [ 2 Answers ]

I installed the universal hampton bay remote kit and when the fan runs over our bed the light strobes on and off. Quite the distraction. Anyone know a fix, is it a bad receiver?

Hunter fan w/ light & reversing switch on remote, remote not working properly [ 1 Answers ]

Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what...

View more questions Search