Ask Experts Questions for FREE Help !
Ask
    annemoore's Avatar
    annemoore Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 25, 2011, 09:23 AM
    Furnace problems
    Our furnace is still taking air and odor from the basement and pusishing it up stairs. We sealed all the openings around the furnace and there is no vent on the furnace. Our 5 intake vents are on the main floor what could be the cause of this. Thanks in advance
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 25, 2011, 02:58 PM
    Are you sure the return is pulling smells in from the basement? Something could be in your ductwork causing the smell, there are companies that clean ductwork if you can`t do it
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Thermostat problems or furnace problems [ 22 Answers ]

Is it possible that a thermostat operates correct all the time except when it reaches the temperature that is set doesn't maintain that temperature?:D I noticed that actually that thermostat gives a signal to the furnace but furnace doesn't turn on but that happens only when thermostat needs to...

Furnace problems [ 1 Answers ]

I have an Intertherm gas furnace and the draft inducer stays running after the furnace cuts out. Any Ideas Why?

Furnace problems [ 1 Answers ]

I am having a bucket (every two days) full of water coming from my furnace. The water is strictly coming from the side plastic pipe, which I have been calling the condesation pipe. Is this a problem that I have to get looked at? My furnace is a gas high efficiency --- about 12 years old. I...

Furnace problems [ 5 Answers ]

My unit is about 9yrs old. It's an Evcon/Coleman... The problem is that when you set the temp. it will kick on but there is no fire through the little window. It will not light at all. Could something need cleaned or adjusted and if so how do I go about doing it. I am somewhat mechanically...

View more questions Search