 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a gas furnace that keeps cycling then kicks out for an hour. This started since the replacement of a fan motor. Warning code is four flashes. Already jumped all sensors that could be affected by this code all was good. Took filter out, cleaned A-coil. Not sure what else to do. :confused:
My original gas furnace (70s' technology) and my new medium efficiency furnace share a common problem. The same problem existed with a conventional mercury thermostat and a modern programmable thermostat. When bringing up the temperature the furnace will shut down and then immediately begin a new...
My newer energy efficient furnace cycles every 10 minutes about, I have a new one story home that is very well insulated.
I have a Trane gas furnace w/no standing pilot it's electronic. Anyway when the t-stat calls for heat it will fire up and the shut of within 5 secs. It will do this approx. 4 times before it will eventually lock itself out and the blower will continue to run not ever reaching setpoint. I know...
We had an air bubble in the vacuum system, removed the clamp, blew in the tube, problem solved-thanks for everyone who looked!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
